SPK-CNH Spacer Kit
For 4B, 4H, 8A, and 8B Crop Lifters
This spacer kit contains a specially designed spacer and the required hardware to allow the use of the 4B, 4H, 8A, and 8B crop lifters on the following cutterbar platforms while utilizing the factory poly skid shoes:
MacDon® headers to fit 973, D50, D60, D65, FD70, FD75, CA25, FD1, D1, FM100.
Case IH® headers to fit 2152, 2052, 2142, 2162, 2062
New Holland® headers to fit 82C, 83C, 84C, 86C.
When mounting the 4B and 4H crop lifter, the factory, shouldered sickle guard mounting bolt and nut are replaced with the SP-CNH spacer using the fasteners supplied with the crop lifter. For for the 8A and 8B, the SP-CNH spacer and the fasteners included in the kit must be used.
New 4H crop lifters are shipped with the SP-CNH spacer included in the existing installation kit. For the other applications, the SPK-CNH spacer kit is sold separately.
MacDon® headers to fit 973, D50, D60, D65, FD70, FD75, CA25, FD1, D1, FM100.
Case IH® headers to fit 2152, 2052, 2142, 2162, 2062
New Holland® headers to fit 82C, 83C, 84C, 86C.
When mounting the 4B and 4H crop lifter, the factory, shouldered sickle guard mounting bolt and nut are replaced with the SP-CNH spacer using the fasteners supplied with the crop lifter. For for the 8A and 8B, the SP-CNH spacer and the fasteners included in the kit must be used.
New 4H crop lifters are shipped with the SP-CNH spacer included in the existing installation kit. For the other applications, the SPK-CNH spacer kit is sold separately.
INSTALLATION PHOTOS
Without Spacer
|
With Spacer
|
4H Application
|
8B Application
|
|
|
